![]() You’d better opt for cameras from time-proven manufacturers like HikVision. Avoid “No name” cameras that claim to use their own cloud, P2P or ActiveX because they tend to be troublesome in work with third-party software. Tip: Look for ONVIF support in ip camera specification, it will increase chances that the camera will be detected in Xeoma automatically. Support for direct RTSP, direct HTTP protocols. ONVIF – all ONVIF-compliant models, including those with ONVIF-powered PTZ. IP cameras (including W-Fi, Fisheye, PTZ, ONVIF cameras. ![]() ![]() The same goes for similar camera modules by other vendors (like Arducam). If the camera is working in standard utilities like Video4Linux, there are high chances that Xeoma will see it too. Original Raspberry Pi Camera Module is usually “recognized” and connected in Xeoma automatically if it is “seen” in the system of supported ARM devices. Raspberry Pi camera module (ARM-based devices). Video capture cards and the like must use DirectShow/WDM drivers and have 1 chip per channel.ĭVRs must work with MJPEG, JPEG, H264 or MPEG-4 streams and stream video through http or rtsp. If you are planning on buying a USB webcam we recommend UVC standard supporting cameras – they don’t require driver installation and can work straight after being plugged in to a computer.Īnalogue cameras: Xeoma supports analog cameras connected through capture cards, TV tuners, DVRs, USB dongles, etc.
0 Comments
Leave a Reply. |